This page was translated from the original Japanese by AI. Read the original article in Japanese

How to Use a Dual-Ended Liquid Lip Color: Let the Color Dry Before Adding Clear Gloss

Apply the color end of the dual-ended liquid lip product first, then add clear gloss once the color has dried.

For a product with liquid lip color at one end and clear gloss at the other, spread the color over your lips first, then apply the gloss once the color has dried, following the product directions. If you go straight from applying the color to opening the other end, the color underneath may shift or transfer to the clear gloss brush. Take a short pause between applying color and adding shine.

This guide covers dual-ended products designed for applying the color and clear gloss in that order. Check the names of the two ends, the wait time, and the touch-up directions for the product you own.

1. Identify the color and clear gloss ends

Apply the color end of the dual-ended liquid lip product first, then add clear gloss once the color has dried.

If the box or tube says “lip color” and “gloss,” or if the ends are numbered, check which one to open first. Even if you can see color on one end and the other looks clear, check the label instead of relying on the look of the tube. Left and right change each time you turn the product around, so use the names or numbers as your guide in the mirror.

The tips can differ: one might have a flocked applicator that picks up color, while the other has a short brush for spreading clear gloss. If the tips look alike, open the ends separately and check their names. Keep the clear end closed before opening the color end to avoid mixing up the caps.

Compare the shape and bristles of the flocked color applicator and the short clear gloss brush from the side.

Some products pair the lip color with a primer or a balm. If either end could look clear, check the box to see whether that product goes on first or last. If you are pairing your regular lipstick with a separate finishing product, see how to match a lip top coat with your lipstick.

2. Spread a thin layer of liquid lip color from the center

Use the flocked applicator on the color end to dab a little color onto the center of the lower lip.

After opening the color end, look at how much liquid is on the part of the tip you will use. If there is a large drop at the tip, adjust the amount according to your product directions before placing it at the edge of your lips. Check that the color end is the one you opened so you do not dip the colored applicator into the clear end to remove excess.

Check both lips in the mirror, dab a little color in a spot such as the middle of the lower lip, and spread it sideways within the lip line. As you approach the lip line and corners, use the narrow side of the tip and work a short section at a time. If the color you placed in the center still spreads, there is no need to pick up more for each section. If one side looks lighter, lift the tip, face forward, and see where the color has not reached.

If you can see a thick streak, smooth that small area before it dries without adding more liquid to the tip. If you notice uneven color when you finish, check how to touch it up before applying clear gloss. Looking at the color underneath makes it easier to pinpoint what needs fixing than trying to cover it with gloss.

3. Pause after applying color and let it dry before adding gloss

After applying the color, keep the clear end closed until the color on the lips dries.

Once you have spread the color, close that end and wait for the color underneath to dry. Follow any recommended wait time on your product. Avoid borrowing the wait time from another lipstick or judging dryness by shine alone; also check whether you applied the first layer too thickly.

Keep your lips slightly apart as you wait and avoid rubbing them together to spread the color. If color collects at the corners or inside the lips, try changing either the area you cover or the amount you pick up next time, rather than adding more liquid with the next swipe.

Viewed from the side, the lips are held slightly apart while the liquid color dries.

Use a check such as touching your lips or pressing them against a tissue only if your product directs you to. If you suspect the color could still move, give it a little longer before opening the clear end. If it is hard to make time to wait before going out, arrange your routine so you can do your hair or get dressed after applying the color.

4. Layer on a little clear gloss at a time, starting in the center

Place the brush from the clear end against the center of the lower lip and dab on a little gloss.

Open the clear end after the color has dried. If you have not decided where to add shine, start with a little gloss in a spot you can easily see in the mirror, such as the middle of the lower lip. Spread a thin layer within the lip line and check where the shine sits on both lips. Before moving toward the edges or corners, see whether what is left on the tip after doing the center is enough.

If gloss collects at the edge, lift the brush away and look at your lips when they are naturally closed. Going over the edges repeatedly to add gloss can also move the original outline of the color. If the gloss tends to spread outside your lips, see how to adjust lip gloss that goes past the lip line for help with the amount.

When touching up, distinguish between fading color and shine that merely looks less pronounced. If the color remains and the directions explain how to reapply just the gloss, use that method only where needed. If you need to redo the color layer, do not assume you can apply color directly over gloss. Go back to the product’s removal and application directions.

5. Return each applicator to its matching end

Return the color applicator and clear gloss brush to their corresponding ends of the tube.

When you finish, check whether any color has transferred to the clear brush before putting it back. If the directions say to wipe it, follow them. Close the tube without mixing up the clear and color applicators. Do not add water to the tube or stir any color that got into the clear end with the wand.

If color repeatedly gets on the clear brush, think back to how much color you applied and how long you let it dry. Adjust one of those at a time to make it easier to trace where the color started transferring. If you would need to rub over your entire lips several times, stop layering for the day and check the removal instructions before reapplying.

If you may be unsure which end to use away from home, look at where the color sits and where the light hits after applying it in the morning. With a tube that goes color, pause, then clear gloss, it becomes easier to pick the next end you need when you are at the mirror.

See all articles →