With bottled facial cleansing powder, you dispense the amount you need each time. Once the powder falls into the mesh of a foaming net, it can be hard to tell how much you poured. If the directions call for a net with a measuring dish, catch the powder in the dish first, then transfer it to the mesh. That way, you can check the amount before lathering.
This guide covers bottled facial cleansing powders designed to be lathered before use. The steps for turning the net inside out apply to nets that have a measuring dish on the inside and are designed to be used that way. If your product calls for lathering in your palms or measuring a different way, follow its directions.
1. Check the amount of cleansing powder for a single use and how to measure it

Before opening the bottle, read the directions on the side or on the box to find out how to measure a single use. Check whether the product calls for its own measuring feature or lists a guideline such as a spoon measure. You do not need to assume a single shake delivers the right amount just because of the shape of the bottle.
Even if your net has a measuring dish, its capacity may not suit every facial cleansing powder. Compare the amount specified for the powder with the cleansers or measuring methods listed for the net. If the dish is suitable, check whether you should fill it or use another measure.
If you wet your hands first while getting ready in the morning, for example, you may have to pick up the bottle again to read the small print. Read the directions first and put the bottle and net within reach. For a cleanser you use only occasionally, check how often to use it as well as the amount. For enzyme powders, you can also read how to use enzyme facial cleansing powder for guidance on frequency.
If you use more than one powder cleanser, read the directions on the bottle you are using today instead of relying on the amount you remember from another product. If the detailed directions appear only on the box, keep it near the bottle until you are familiar with them, or keep a copy of the instructions handy.
2. Wet the net and turn the measuring dish face up

Wash your hands and wet the net with cool or lukewarm water. Wet the mesh used for lathering. Stand the bottle somewhere away from splashes, and turn off the tap before dispensing the powder. If the net comes with instructions on how wet to leave it, follow them.
If the net is designed to be turned inside out, pull back the mesh to expose the measuring dish. If the mesh covers the dish, move it aside slightly so you can see the whole rim. Before dispensing powder, check that you can hold the dish with its hollow side facing up.

If pulling on the handle turns the dish sideways, find a spot to support the dish from underneath with your other hand. Before you start, decide which hand will hold the bottle and which will support the net so you do not need to switch midstep.
If water collects in the dish and makes the powder hard to see, adjust how you hold the net before pouring, following its instructions on how wet to leave it. There is no need to dry the mesh used for lathering. Wait until the dish is steady and you can see into it from above before opening the bottle.
3. Dispense the powder into the measuring dish and transfer it into the net

Hold the dish level and bring the bottle opening above it. Leave a small gap so the opening stays clear of moisture on the mesh or dish, and dispense the powder as directed. It is easier to adjust the amount if you can tip the bottle upright partway through to check it instead of pouring a lot at once.
If the powder piles up on one side and you cannot judge the amount, first turn the opening upward to stop the flow and see whether the dish is tilted. Check the amount specified before adding any more. If excess powder has touched the wet dish or mesh, keep it out of the bottle and dispense less to start next time.
Once you have measured a single use, stand the bottle upright and close it first. If your net is designed to be turned right side out again, support the middle of the mesh and turn it so the dish faces inward and the powder falls into the net. Keeping the bottle step separate from lathering means you will not have to reopen it repeatedly after your hands are wet.
If the directions show a different method, such as lathering straight from the dish, skip the step of turning the net back. If your accessory looks different from the one shown, check how that particular shape is meant to be used before removing the dish or retying the mesh.
4. Work the mesh and check the dish for remaining powder

Gather the wet net loosely in both hands and rub it to build lather. If the net is designed to be worked with the mesh folded over itself, shift your grip instead of squeezing the same spot each time. If powder remains in the measuring dish, move the mesh as directed to transfer the powder to the part used for lathering.
If you still see powder, locate it before adding more cleanser. If it is along the rim, move the mesh around the dish. If it has clumped in a fold, loosen that part as you work the mesh. Running water over the net all at once can wash away both powder and lather. If the directions call for adding water, pay attention to how much you add.

When the lather is ready, collect it in your palm using the grip specified for the net. For where to squeeze and how to move your hands, see how to collect foam from a facial foaming net. Use the lather you collect. Avoid washing by pressing the mesh against your skin or rubbing your skin with powder that did not mix into the lather.
The amount of foam can vary from one use to the next, and its volume alone cannot tell you whether you used enough cleanser. Go back through the steps in order to narrow down the cause: Did you dispense the amount specified, transfer it from the dish to the mesh, and start with the mesh wet?
5. Rinse the net and store the bottle with the cap closed

After washing your face, look for foam or powder left on the net. Spread out the mesh as far as it will open, and rinse the rim of the dish and any places where the mesh was bunched. Leave the dish in place if it does not come away easily. If the net has care instructions, follow them to drain and dry it.
Keep the bottle out of the rinse water. Check the opening and cap for anything stuck to them, then store the bottle as directed. If the cap is sitting unevenly, check whether mesh or a towel is caught under it, and close it again as specified. If you keep the bottle next to the wet net, droplets can get onto the container before the net dries. Putting them away separately can make cleanup easier.
If you run into trouble next time, start with the step that gave you pause and change one thing at a time. If the amount was unclear, review how you read the directions. If powder spilled, check the angle of the dish. If powder remained, check how you moved it from the dish to the mesh. Instead of just counting shakes to try to dispense the same amount each time, watch until the powder lands so you can see what to adjust.